Got most of the components in. The speaker and amplifier from Ada Fruit will be here ether tomorrow or Saturday. I'll put this project on hold for now until tomorrow and just get the battery to where it's charging.

I was thinking about being able to give this phone commands without having to take it apart, connect the serial board, and a USB cable to the computer...

Things we could possibly do with commands is enable A2DP for high quality audio, or set volume level. I will have to finish reading this PDF, h...

Updated the wish list to include USB cables, a power switch, and jumper wires, and a breadboard for power distribution.

https://www.sparkfun.com/wish_lists/74897

I am going to buy the Jumper Wires from Amazon, http://www.amazon.com/dp/B00BQA5BWU/, as it's cheaper for many more wires and types....

The site I'm reading to learn about circuits is really good. This is the same company which sells all the components I'll be buying to make this happen.

Start here, https://learn.sparkfun.com/tutorials/rn-52-bluetooth-hookup-guide, follow through the suggested reading as it goes into depth about...

So, I hooked up the cable to the place I thought it should have been hooked up to and now the phone rings. So ringing works well with this VOIP phone, guessing nothings changed since these phones existed.

https://plus.google.com/+JamesColeman/posts/Yvq4d2i2qTg?pid=5951742858112683058&oid=104359338...

The way I'm told to handle the connections on both the hook and the rotary is to hook one cable to ground and the other to a digital input. I'm told that ground is reference zero volts or something like that meaning that it'll be ether 0/1 to the digital input which I need to determine when I write...