New light design works great! Basically my issue with why the lights all turned on when you turned on another color was just an issue of the tops of the MOSFETS touching each other. Separating them out fixes the issue.

I gone ahead and bought a power supply which is made for these sorts of things...

Well, success and failure on this project here. It seems that the arduino has some cross talk on the analog outs and when I turn on red or blue, it turns on both. I had it where green can be individually turned on but in trying different pins, I got it to where if one is on all is on, therefore I ju...

The cables I have are not good enough for the power these LEDs uses. They are probably rated for 12V at 1A, and this is 6A.

My LED kit I bought wasn't designed correctly. The LED strip they used is 6A and the power supply they provided is 5A. If you were to add the controller to it, it's way over the AMP rating of the power supply. Because they didn't design it for the AMPs that is being used, it melted and I ended up th...